MTP-200 Series User’s Manual
Shineway Technologies, Inc. - 27 -
Application will promote user to save unsaved trace before starting new test.
7.3 Unsaved Traces
Unsaved traces will be titled as “*U_xxxx” (xxxx stands for the current testing wavelength)
which is displayed on the left upper corner of trace display area.
The traces whose file names start with star mark “*” are unsaved traces or modified traces.
Please refer to later contents of this manual for more information about OTDR trace
modification.
7.4 Save Trace
When test is finished, user can save the trace with parameters information. The content
includes trace parameters and etc.
Procedure:
1. Click [Save] on the right lower corner of main interface and save dialog window
will pop up.
2. File format: User can choose file format as “.sor” or “.jpg”.
3. User can click button on the top of save file dialog to choose saving
directory or click to create new folder.
4. User can edit the name of the file to be saved; the file name consists of letters
and numbers which can be input by soft keyboard.
5. File saving: In save dialog window, click [Save] button to save file.
6. Click [Cancel] to cancel file saving.
Save dialog window and options are shown below in Fig 7.2:
To Next Page
Loading...
