MTP-200 Series User’s Manual
Shineway Technologies, Inc. - 8 -
Tab. 1.6 GUI Icons Instruction
1.9 Power Instruction
MTP-200 uses following power supplies:
➢ AC adaptor (Connect to standard outlet – Indoor use only)
➢ Li-ion rechargeable battery (Auto power supply when AC adaptor is unplugged)
➢ Battery dock cover must be closed properly when MTP-200 is working.
➢ AC adaptor and battery power supply can be switched without affecting operation
➢ After AC/DC power adaptor is connected, built in Li-ion battery will be
automatically charged.
When only using Li-ion battery as power supply, following situations may cause
MTP-200 automatically power off or dysfunction
➢ The battery power indicator displayed on LCD screen will turn red (Low battery)
when the battery power is insufficient and MTP-200 may automatically power off.
➢ If unused for a long time, MTP-200 may not power on properly, please connect
power adaptor and recharge the battery.
1.10 Use of Rechargeable Battery
➢ Battery for MTP-200 is Lithium rechargeable battery.
➢ 3.5 hours for full charge
➢ When MTP-200 is charged by AC/DC power adaptor, charging indicator on the
front panel will turn red and turn green after charge is complete.
➢ When MTP-200 is powered on and being charged, LCD will also indicate
charging status.
75%: Showing battery power level with percentage behind, 75%
indicates the current battery power is 75% of the total battery power.
: Battery unplugged or connection is poor.
: Power adaptor plugged.
MTP-200 battery is rechargeable Li-ion battery. If unused for a long time, please charge the
battery to 50%-70% before conservation.
To Next Page
Loading...
