ShinewayTech MTP-200 Series

To Next Page

To Previous Page

MTP-200 Series User’s Manual

Shineway Technologies, Inc. - 78 -

Fig. 18.1 Optical Connector Inspector Interface

4. Click [Start] button or Press “ ”（Start/Stop）button on MTP-200 front panel to start the

measurement. As shown in Fig 18.2

Main Page

Warranty3
ISO9001 Certification3
Safety Instructions3
- Laser Safety Announcements5
- Electric Safety Announcements5
Agreement and Statement6
- Table of Contents7
1 General Information14
- Scope of this Manual14
- Introduction14
- Product Appearance15
- Front Panel Indicators Introduction16
- Front Panel Keys Instruction16
- Operating Parts Instructions17
- Instrument Interfaces Instructions18
- GUI Icons Instruction20
- Power Instruction21
- Use of Rechargeable Battery21
2 Basic Operation22
- Foreword22
- Power On/Off22
- Enter and Exit Power Saving Mode22
- Adjust LCD Brightness23
- Start Application23
- Install USB Keyboard/Mouse24
- Printer Configuration25
3 Common Settings and Special Settings26
- Main Setting Menu26
- Select Language27
- Automatic Power Saving Setting27
- Recalibrate Touch Screen28
- Serious Deviation of Touch Screen29
- Date and Time Settings29
- Other Parameters Configuration29
- Load Default30
4 Basic Information of OTDR Module30
- Principle of OTDR Module30
- Measurement Application of OTDR31
- Basic Definition and Classification of Events31
  - Reflection Events31
  - Non-Reflection Events32
- Optic Fiber Link and Event Types32
5 Instruction of OTDR Modules of MTP-20033
- Main Features of OTDR Module33
- Measurement Mode of OTDR Module33
- OTDR Interface35
- Icons Instruction in OTDR Interface35
- Trace Processing36
- Available OTDR Module37
6 Prepare to Use OTDR37
- Connectors Instruction37
- Cleaning and Connecting to Optical Fiber37
7 Test with OTDR38
- OTDR Quick Test38
- Trace Processing39
- Unsaved Traces40
- Save Trace40
- Auto Naming42
- Open Saved Trace42
- Trace Viewing and Analysis Operation42
- Information and Function Windows43
- Upload Trace to PC45
- Get Help on OTDR45
8 Testing Optical Fiber in Auto Mode45
- Instruction of Auto Testing Mode45
- The Procedures of Auto Testing Mode46
9 Testing the Optical Fiber in Manual Mode46
- Common Using Parameters for OTDR Testing47
- OTDR Test Parameters Configuration47
- OTDR Display and Other Configuration48
- Real Time and Average Test Mode48
- Range Configuration49
- Pulse Width Configuration49
- Averaging Time Configuration50
- Laser Wavelength Configuration50
- IOR Setting51
- Scatter Coefficient (Back Scatter) Setting51
- Non-Reflection Threshold (Splice Loss Detecting Threshold) Setting52
- Reflection Threshold (Reflection Detecting Threshold) Setting52
- End Threshold (Optical Fiber End Detecting Threshold) Setting52
- Load Default53
10 Use OTDR Test Fttx-PON Network Optical Fiber Link53
- Use PON Optimized OTDR Instrument53
- Select the Proper Distance Range53
- End Threshold (Optical Fiber End Detecting Threshold)53
- Test Parameter Recommendation Value54
11 Trace Analysis and Event Operation54
- Open Trace File54
- Simultaneous Display Multi Traces55
- Close Trace File56
- Trace Display and Operating Instruction56
- Switch and Move Markers57
- Switch and Move the Marked Point58
- Fast Move the Markers Outside the Window58
- Lock AB Markers59
- Zoom the Trace59
- Cross Frame to Zoom the Trace59
- Use Zoom Toolbar to Zoom the Trace60
  - Revert the Whole Trace View60
  - Zoom in Trace Horizontally60
  - Zoom out Trace Horizontally60
  - Zoom in Trace Vertically60
  - Zoom out Trace Vertically61
- Remember the Zoom Status Automatically61
- Move the Magnified Trace Window61
- Operation of Event Options62
  - Display the Event on the Trace and Locate Event in Even Sheet63
  - Add Event64
  - Modify the Event65
  - Delete Event66
- Analysis Detecting Threshold Configuration67
- Reanalyze the Trace68
- Analyze the Optical Fiber in Specific Optical Fiber Link69
- Set Trace Display Parameter69
- Set the Length Unit71
- Display or Switch the Trace71
- Check Current Trace Parameters71
12 Manual Trace Analysis73
- Use Markers73
- Event Location and Loss Information73
- Measure Insertion Loss (2-Point and 5-Point Method)74
- Measure Attenuation (2-Point and LSA Method)77
- Measure Reflectance78
13 Trace File Management79
- Save Trace in Different Formats79
- Copy, Move, Rename and Delete Trace80
- Check Disk Space81
14 Print OTDR Report81
- Trace Information81
- Check and Edit Trace Information82
- Print OTDR Report83
15 OTDR Module Built-In Stabilized Laser Source LS10086
16 OTDR Module Built-In Optical Power Meter PM10087
17 VFL Application89
18 OCI (Optical Connector Inspector) of MCI10090
- Inspect the Optical Connector90
- Adjust the Image' Brightness and Contrast92
- Focus Control93
- Zoom Image93
- Capture Image93
- View the Saved Image93
19 File Management94
- Transfer Files or Folders between MTP-200 and USB Storage Device94
- Transfer Files or Folders between MTP-200 and PC95
- Delete Saved Files96
20 Maintenance and Calibration96
- Cleaning of Optical Interfaces96
- Necessity of Cleaning96
- Safety Instructions before Cleaning96
- Cleaning Tools97
- Cleaning Procedure97
- Battery Charging Instructions97
- Battery Instruction98
- Charge Battery98
- Battery Calibration98
- Change Battery99
- Calibration Requirements99
- Shipment99
21 Troubleshooting100
- Common Problems and Solutions100
- Trace Measurement Problems and Solutions101
- Finding Information on Shinewaytech Website101
22 Warranty102
- Terms of Warranty102
- Exclusion102
- Warranty Registration102
- Returning Instruments102
- Contacting Customer Service103
Product Information104
- Standard Package104
- Optional104

ShinewayTech MTP-200 Series - Page 91

Table of Contents

Related product manuals