OPM-50 User’s Manual
Shineway Technologies, Inc. - 5 -
➢ Automatic wavelength identification
➢ Automatic loss measurement
➢ Remote reference value setting
➢ FTTx applicable
➢ Internal clock & fiber S/N editable
➢ Memory of 1000 test records
➢ Data Transfer to PC via USB
➢ USB power charging
➢ No warm-up, quick start
➢ Backlight
➢ 125 hours continuous operation
➢ Pocketsize, lightweight and easy-to-use
➢ CE FCC certificates
Automatic Wavelength Identification
Compatible with the digital encryption protocols of SLS-50, OPM-50 can automatically
identify the wavelength of the optical signals transmitted from SLS-50 and switch to the
corresponding test mode, which greatly reduces the workload at both ends and risk of
potential error.
Remote Reference Value Setting
OPM-50 can receive the power parameters of digital-encrypted signal transmitted from
SLS-50 as reference for precise link loss measurement even the two units are far apart.
Internal Clock & Fiber S/N Editable
Internal clock enables OPM-50 to save test data with time and editable fiber SN
information.
Compatible with FTTx Test
OPM-50 can be applied to measure Triple-play signals (1310nm, 1490nm and 1550nm) on
Passive Optical Network (PON).
2B2. Basic Operation
10B2.1 Foreword
This part introduces the basic operation on OPM-50. Specific operations of each type
instrument are elaborated in Chapter 3 of this manual. Please read this manual carefully for
optimal operation. If you encounter any problems during operation, you are welcome to
To Next Page
Loading...