OPM-50 User’s Manual
Shineway Technologies, Inc. - 1 -
0BSafety Instructions
The WARNING sign denotes a hazard. It calls attention to a
procedure, practice, or the like, which, if not correctly performed or
adhered to, could result in personnel injury. Do not proceed beyond a
WARNING sign until the indicated conditions are fully understood
and met.
The CAUTION sign denotes a hazard. It calls attention to an
operating procedure, or the like, which, if not correctly performed or
adhered to, could result in damage to or destruction of part or the
entire product. Do not proceed beyond a CAUTION sign until the
indicated conditions are fully understood and met.
The NOTE sign information that may be beneficial during the use
and maintenance of the instrument.
➢ Always avoid looking directly into the optical output port,
Users should avoid looking directly into optic output of any working
laser source or live fiber. And the use of microscope or magnifier
should also be avoided, for the use of such devices can focus a highly
intense beam onto the retina, which may result in permanent eye
damage
Battery: OPM-50 battery type is lithium battery. Do not take battery
out without technical staff’s assistance. Do not expose battery to fire
or intense heat. Do not open or mutilate battery. Avoid touching the
electrolyte in the battery, which is corrosive and may cause injuries to
eyes, skin or damage to clothes.
External Power Supply: Power Adaptor, 5V DC/750mA
Laser Radiation: To avoid serious eye injury, never look directly into
the optical outputs of fiber optic network equipment, test equipment,
patch cords, or test jumpers.
To Next Page
Loading...