OPM-50 User’s Manual
Shineway Technologies, Inc. - 4 -
1B1. General Information
7B1.1 Scope of this Manual
Thank you for purchasing ShinewayTechP
P instrument. Please read this manual carefully
before using ShinewayTechP
P fiber optic instrument. Always be aware of the Warning and
Caution sign appearing throughout this manual.
This manual contains the information necessary for proper operation and maintenance of
ShinewayTechP
P instrument, troubleshooting instructions as well as information regarding
maintenance services.
All ShinewayTechP
P instruments are carefully assembled and undergo rigorous mechanical,
electrical, and optical inspection prior to shipment. Beside the instrument, the package also
includes a lithium battery pack, a charging/data transfer cable, a power adapter, a FC/PC
flange and this user's manual. For detailed information, please refer to the packing list.
Upon receiving the instrument, please check for any obvious signs of physical damage that
may have occurred during shipment. Report any damage to the shipping agent or the
representative of Shineway Technologies Inc. immediately. Retain the original packing
materials in case reshipment is necessary.
8B1.2 Unpacking and Inspection
This instrument has been carefully packed in accordance with standard shipping procedures.
Examine the instrument for damage that may have occurred during shipment. If you find
any damage or the instrument is not working, or if any of the following items are not
included, please contact your representative of Shineway Technologies, Inc.
If necessary, you may contact Shineway Technologies, Inc via this email:
support@shinewaytech.com.
9B1.3 Introduction
ShinewayTechP
P OPM-50 paired with SLS-50 Intelligent Stabilized Laser Source can be
used to identify fiber, measure attenuation and loss, verify continuity and evaluate fiber
link transmission quality.
Features:
To Next Page
Loading...