ShinewayTech OPM-50 - Performing Zeroing Measurement; Setting Reference Values

OPM-50 User’s Manual
Shineway Technologies, Inc. - 10 -
1550 nm
-15.34
dBm
CW
Contrast
Figure 3.3
Press button to enter the interface. Press and button to adjust
contrast and press button to confirm.
16B3.3 Zero
Press and button to [Zero] interface, see Figure 3.4.
1550 nm
- - - - - -
Low
dBm
CW
Zero
Figure 3.4
Press button to start zeroing. If zeroing is successful, below screen will appear,
please see Figure 3.5.
1550 nm
SUCC
Low
dBm
CW
Zero
Figure 3.5
If zeroing fails, below screen will appear, see Figure 3.6.