SHING RAY FW787 - LUBRICATION OIL

-6-
1. 請選用與 PMOBIL#10 同級之潤滑油。
2. 在新機使用前請先注入潤滑油。旋
開頂蓋上的噴油檢視蓋(A)，將油
緩緩注入機器中，待油量滿至油標
指示窗(B)上下線之間即可(圖3)。
3. 於每天開機操作時，請先檢查噴油
狀態是否正常，且注意油量是否低
於指示窗之下限，若低於下限請隨
時補充新油。
B 潤滑：
1. Please use MOBIL #10 or it's equivalent.
2. Before operating the new machine,
to remove Oil Sight Window (A) and
fill the oil slowly until the oil level
reaches between lines H and L of Oil
Sight Gauge (B). (Fib.3)
3. When you begin operating the machine
in everyday, please check whether all
the lubricating systems at normal
condition. If oil level is lower than L
of Oil Sight Gauge, please refill oil.
B. LUBRICATION OIL :