Shining 3D EinScan-SE - Help; Model Viewer

33
Hold down the middle mouse button: pan the object;
Hold down the mouse wheel: Scroll up and down to the object; scroll down to enlarge
the object;
Hold down the Shift + left mouse button: select the area on the object;
Hold down the Ctrl + left mouse button: deselect selected data;
Delete: Delete the selected area.
Auto scan’s manual align, the prompt text is as follows:
Press and hold shift + left mouse click: Select point to start manual align
Current Points and Triangles
When scanning it will show the current points and current
triangles in the lower right corner. When you edit the scan data, the current points and the
current triangles change in real time.
Click this button to get the operation manual and notes in more detail under the current
step.
The following picture shows the help information of new project.
Einscan software can be a 3d viewer for ASC, OBJ, STL format file. Drag the 3d model to
Einscan software under scanning mode interface.
Auto Scan