Shire Pixie - Step 22: Fascia Fitting; Step 23: Plastic Glazing Fitting

23
22
GB-IE Make sure the nails go into the gable framework avoiding the felt nails.
GB-IE Remove the protective film from both sides of the plastic glazing before fitting.
16mm Panel pin
(A0024) x112
Beading-door-window
(A0022)X32
Plastic Glazing
(A1157) x04
Fascia
(A3319 A3320)
2 of each
40mm Nail
(A0025) x16
Flat bottom diamond
(A0479)x02
1mm
Front Back
8.5mm
8.5mm
267mm
267mm
27
Plastic Glazing
(A3033) x08
267mm
201mm
Beading-window
(A0481)X16
8.5mm
8.5mm