SHOWTEC Lampy 40 - Page 55

54
Showtec LAMPY Series
Product: 50740 / 50741 / 50742 / 50743
Record Mode default.
Define the default for the values that should be recorded by the console when recording items. You can
choose between the following record modes:
Button
Function
Programmer
Content
Will record all parameters that are touched.
All for Selected
Will record all parameters of the selected fixtures, no matter if they are touched or
not.
All Values
Will record every parameter for every fixture on the console.
When recording, you may also click on the Command in the title bar to change this value for this record
action.
Fig. 53: Show Settings – Record Mode default