SHOWTEC SCENE PILOT - Page 10

2.
Operation
Guide
4. Tap the Record button
to record scenes.
Create
a
desired scene on
your
DMX controller.
Once
the scene is satisfactory, tap
the Record/
Mode bufton to record this scene as
the first
step, all LEDs
flash
briefly
indicating
you've
record this scene into the
program
and the
Segment
Display
shows the current
step.
5. Continue
recording scenes until
you've got
a
desired
program.
You may
record
a
maximum
of
48 scenes into a
program.
6. Tap
the Black-out button until the Record LED
goes
out, this unit is out of
Record mode.
1. Record enable
2.
Repeat steps 2-3 in
Record Scenes to select
the
program you
wish to delete.
3.
Tap
the
Del button
to
delete the
program,
all
LEDs flash briefly indicating this operation.