SHOWTEC SCENE PILOT - 2. Operation Guide; 2.1 Record Mode

2.
Operation
Guide
Press and hold down the Record/Mode
button
for five seconds, the LED above
it
lights
indicating Record mode is active,
the Segment
Display
shows the
program
and
its scene of last time.
The DMX
LED will
light
when DMX signal
is
present.
1. Record enable.
2.
Tap the Program
or
Strobe button
to
select
chase
programs
or strobe
programs.
The
LED
near
it
lights indicating
your
selection.
3.
Tap the UplDown button
to
select
the
program
you
wish
to record scenes into.
There
are total 9 chase
programs
and
9 strobe
programs.