SHOWTEC SCENE PILOT - 2.7 Black-out Mode

2. Operation
Guide
3. Tap the
Fade+Speed button to
receive data file,
the Segment
Display shows
"1N".
Attention:
please
be sure
you
proceed
receiving
before
sending
so
that
you
can
receive complete
data
file.
During
the course
of sending,
all other operation
doesn't
work.
4. When
receiving
is over,
the
Segment
Display
shows
"END".
Tap any
button to leave
this mode.
1.
Turn
the
power
off.
2. Press
Speed
and
Black-out
buttons at a time
while turning the
power
on.
lf the Segment
Display
shows
"Y-BO",
this
unit
gives
zero
output
when the
power
is
tumed on; if
the
Segment
Display shows
"N-BO", output
is
turned on
when
the
power
is turned
on.