SHOWTEC SCENE PILOT - 2.8 Initialization

2. Operation
Guide
3. Tap the Fade+Speed
button to
change
between'N-BO" and
"Y-BO".
4.
Tap
the Program button to leave this
mode.
All the
programs
are blank when
this
unit is
packed.
lf
you
are not satisfied with
your
programs, you
can
initialize
ihis unit to clear all memory.
1.
Turn
the
power
off.
2. Press
Program,
Up and
Fade+Speed
buttons at
a
time
while turning the
power
on, this
unit will be initialized and return to factory
setting.