SHOWTEC SCENE PILOT - 2.5 Send Data File

2. Operation Guide
ïg=
2. Tap the Up/Down button
to adjust the speed
within 0.1-600
seconds,
the
Segment
Display
shows
the
current speed.
For Example:
1:00
represents
1 minute,
1.00
represents
1
second.
3. Tap the Program
or Strobe button to leave
speed
setting.
1. Keep
pressing
the
Black-out
button
for 3 seconds.
2. Tap
the Program
button while
holding down the
Black-out button. lf this unit has
record the
scenes,
the Segment Display shows
"OUT" indicating this
unit
is ready
to
send
file
dump,
otherwise shows
'EPTY'
indicating all
the
programs
are empty.
=,ffint