SHOWTEC SCENE PILOT User Manual

1.
Overview
1. Power
Switch
2.
Segment Display
3.
Up Button
4. Down Button
5. Record/Mode Button
6. Strobe Button
7. Program Button
8. Black-out Button
Move the
slider
to
Up
position
to turn the
power
on.
Shows the current activity or function state.
Tap the button to
increase
the display value.
Tap the button to
decrease
the
display value.
Keep
pressing
for five seconds to activate Record
Mode, the LED
above it lights indicating this selection.
Tap the button to select
Run
mode from Manual/
Audio/Auto modes.
Tap
the button to
activate
Strobe
programs
and the
LED near it lights
indicating
your
selection.
Tap
the button to
activate Chase
programs
and the
LED near it lights
indicating
your
selection.
Tap the
button to kill output temporarily
or
go
back one
level in Record
mode.
Keep
pressing
for 3 seconds, a
tap
of
Program button
enables to
send file dump as well as a tap of Strobe
button
enables
to
receive
file dump.
9. Speed Button
Tap the button to activate
speed setting.
10. Fade+Speed/Del Button
Tap the button
to
activate
fade
speed.
ln
Record mode, this button can be used
to delete
a
program
or a scene.

SHOWTEC SCENE PILOT Specifications

General

Brand	SHOWTEC
Model	SCENE PILOT
Category	Controller
Language	English