Shure AD Series - Tips for Editing Menu Parameters; Menu Map; Menu Parameter Descriptions; Radio Menu

Shure Incorporated
12/26
•
•
•
•
•
◦
◦
Tips for Editing Menu Parameters
To access the menu options from the home screen, select enter. Select enter again to access the menu parameters.
A menu parameter will blink when editing is enabled
To increase, decrease or change a parameter, use the arrow buttons
To save a menu change, select enter
To exit a menu without saving a change, select exit
Menu Map
Menu Parameter Descriptions
Radio Menu
Freq
Press the enter button to enable editing of a group (G:) channel (C:) or frequency (MHz). Use the arrow buttons to adjust
the values. To edit the frequency, press the enter button once to edit the first 3 digits, or twice to edit the second 3 digits.
Power
Higher RF power settings can extend the range of the transmitter.
Note: Higher RF power settings decrease battery runtime.
Output
Sets the RF output to On or Mute.
On: RF signal is active
Mute: RF signal is inactive