Shure BETA52A - Using the Stand Adapter; Specifications

Shure Incorporated
5/7
1.
2.
3.
Using the Stand Adapter
The integrated stand adapter resists slipping when struck or bumped, yet permits adjustments without loosening the knob.
Thread the microphone onto the stand.
Before tightening the adjustment knob, adjust the stand height and position as necessary.
Tighten the adjustment knob to lock the microphone in place. Do NOT use tools or over tighten.
Specifications
Type
Dynamic (moving coil)
Frequency Response
20to10,000Hz
Polar Pattern
Supercardioid
Output Impedance
45Ω
Sensitivity
at 1kHz,open circuit voltage
-64dBV/Pa(0.6mV)[1]