Need help?Do you have a question about the Shure Microflex MX418D/S and is the answer not in the manual?
General| Polar Pattern | Supercardioid |
|---|---|
| Length | 18 inches |
| Gooseneck | Yes |
| Color | Black |
| Finish | Matte |
| Output Impedance | 150 Ω |
| Connector | XLR |
| Equivalent Selfnoise | 28 dB (A-weighted) |
Details the wide dynamic range, interchangeable cartridges, programmable mute button, logic input/output, and RF filtering.
Explains how Microflex microphones use interchangeable cartridges for different polar patterns.
Offers advice on aiming the microphone and positioning it relative to the sound source.
Lists variations by gooseneck length and base type, indicating cartridge polar patterns.
Describes the installation and 'pop' protection benefits of the snap-fit windscreen.
Illustrates the method for mounting the microphone base to a surface.
Details the function of DIP switches 1 and 2 for configuring the mute button behavior.
Explains the connections for LOGIC GROUND, LED IN, and SWITCH OUT using colored wires.
Provides steps for connecting the microphone to an automatic mixer for audio and LED control.
Describes a hardware modification to change SWITCH OUT behavior from momentary to toggle.
Lists detailed electrical and physical specifications for the MX400D microphones.
Details included accessories like windscreens and optional items for purchase.
Lists available replacement cartridges, such as omnidirectional, supercardioid, and cardioid.
States compliance with CE Marking and European EMC Directive standards.
Presents graphs showing the frequency response for Cardioid, Supercardioid, and Omnidirectional patterns.
Illustrates the directional pickup patterns for Cardioid, Supercardioid, and Omnidirectional cartridges at various frequencies.
To Next Page