Need help?Do you have a question about the Shure P3RA and is the answer not in the manual?
General| Display | LCD |
|---|---|
| Housing | Metal |
| Image Rejection | > 90 dB |
| Adjacent Channel Selectivity | >70 dB |
| Intermodulation Attenuation | >70 dB |
| Blocking | > 80 dB |
| Tuning Steps | 25 kHz |
| Type | Bodypack |
| Frequency Range | 470 - 952 MHz |
| Audio Output Power | 100 mW (at 1 kHz, <1% distortion, typical) |
| Dimensions | 99 mm x 66 mm x 23 mm |
| RF Frequency Range | 470 - 952 MHz |
| RF Sensitivity | 2.2 μV at 20 dB SINAD |
| Minimum Load Impedance | 16 Ω |
| Headphone Connector | 3.5 mm |
| Battery Type | SB900A |
| Audio THD | < 0.5% |
| Power Requirements | 2 AA batteries or Shure SB900A rechargeable battery |
| Dimensions (inches) | 3.9 x 2.6 x 0.9 |
| Net Weight | 196 g (with batteries) |
To Next Page
