EasyManua.ls Logo

Shure SCM410 - Page 13

Shure SCM410
25 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Shure Incorporated
13/25
Frequency Response (at 1 kHz , channel controls centered)
50 Hz to 20 kHz ± 2 dB ; 3 dB Corner at 25 kHz
Total Harmonic Distortion
<0.1% at +4 dBu out , 50 Hz to 20 kHz (through 22 Hz to 20 kHz filter; Input at 12 o'clock and Master at 12 o'clock,
all other controls full counterclockwise)
Equivalent Input Noise: (150 Ωsource; A-Weighted)
-127 dBV maximum, -129 dBV typical
Output Noise (channel controls full counterclockwise A-Weighted)
Master full counterclockwise: -101 dBV
Master full clockwise: -67 dBV
Common Mode Rejection
> 70 dBV at 1 kHz
Polarity
All inputs to all outputs are non-inverting
Input Channel Activation
Attack Time 4 ms
Hold Time 0.4 s
Decay Time 0.5 s
Off-Attenuation
13 dB
Overload and Shorting Protection
Shorting outputs, even for prolonged periods, causes no damage. Microphone inputs are not damaged by signals
up to +10 dBV (3V)
Equalization
Low-frequency 6 dB/octave cut, adjustable corner from 25 to 320 Hz
High-Frequency shelving filter, ±6 dB at 5 kHz, rising to ±8 dB at 10 kHz

Other manuals for Shure SCM410

Related product manuals