Table of Contents
SLX-D Wireless System 3
IMPORTANT SAFETY INSTRUCTIONS 3
WARNING 4
Important Product Information 4
LICENSING INFORMATION 4
Australia Warning for Wireless 4
Overview 5
Features 5
System Components 6
Set Up the Receiver 8
Wearing the Bodypack Transmitter 9
Hardware Interface 9
Receiver Front and Back Panels 10
Navigating the Receiver Menus 11
Transmitters 12
Transmitter Menu Options and Navigation 14
Locking and Unlocking the Receiver Controls 15
Batteries and Chargers 16
Install Transmitter Batteries 16
Setting the AA Battery Type 17
Shure SB903 Rechargeable Battery 17
Average Charging Times 19
Sound Check and Gain Adjustment 19
System Set Up 19
Creating Audio Channels 20
What are Groups and Channels? 20
Using the Guided Frequency Setup 20
Manual Frequency Selection 22
Linking Two Transmitters to a Receiver 23
Adding SLX-D to Other Shure Wireless Systems 23
Radio Frequency (RF) Settings 23
Setting the Transmitter RF Power 23
Networking 24
Connecting to a Network 24
Automatic IP Addressing 24
Configuration Tips 24
Network Troubleshooting 24
Connecting to an External Control System 24
Firmware Updates 24
Firmware Release Requirements 25
Mount the SLX-D Receiver in a Rack 25
Installing Footpads 26
Accessories 26
Optional Accessories 27
Specifications 31
Receiver Output Connectors 38
Transmitter Input 39
Frequency Range and Transmitter Output Power 39
Frequencies for European Countries 40
Certifications 41
Information to the user 41
SLX-D
Wireless System
IMPORTANT SAFETY INSTRUCTIONS
1. READ these instructions.
2. KEEP these instructions.
To Next Page
Loading...
Need help?
General
