Need help?Do you have a question about the Shure SLX-D and is the answer not in the manual?
General| Audio Frequency Response | 20 Hz to 20 kHz |
|---|---|
| Encryption | 256-bit AES |
| Battery Life | Up to 8 hours |
| System Type | Digital Wireless |
| Transmitter Type | Handheld, Bodypack |
| Total Harmonic Distortion | <0.02% |
| Latency | 3.2 ms |
| Operating Range | Up to 100 meters (328 feet) |
| Dynamic Range | > 120 dB |
| Number of Channels | Up to 32 per band |
| Modulation | Digital |
| RF Sensitivity | -97 dBm for 12 dB SINAD |
Steps to connect antennas and power supply to the SLXD4 receiver.
Guide on connecting the SLXD4 receiver's audio output to external devices.
Instructions for powering the SLXD5 receiver using battery or USB-C.
Overview of the menu hierarchy and configuration options for the SLXD4.
Overview of the menu hierarchy and configuration options for the SLXD5.
Configuring RF power, high pass filter, and battery type on transmitters.
How to lock and unlock receiver controls to prevent accidental changes.
Activating and deactivating the auto lock feature on transmitters.
Procedures for installing AA or rechargeable batteries in transmitters.
Information on the SB903 rechargeable battery and its charging.
How to adjust receiver gain for optimal audio levels on SLXD4.
How to set gain for SLXD5 audio outputs.
Process of tuning receivers and transmitters to the same frequency.
Steps for performing group scans, channel scans, and IR sync.
Manually adjusting group, channel, or frequency settings.
Step-by-step guide for initial system setup.
Connecting two transmitters to a single receiver for flexibility.
Procedure for updating SLXD receiver firmware using Shure Update Utility.
Procedure for updating transmitter firmware via IR sync.
Essential safety precautions for operating the equipment.
Warnings and guidelines for safe handling and use of batteries.
To Next Page
