Shure Incorporated
13/56
•
•
•
Navigating the Receiver Menus
The receiver has a main menu for setup and configuration and an advanced menu to access additional receiver functions. Use
the control knob to navigate menu screens and confirm selections; use the exit button to return to the previous level.
SLXD4 Menus and Configuration
Push the control knob button to access the menu, and rotate to advance to the next menu screen.
1. Frequency Setup
1.1 Guided Fre-
quency Setup
Stepbystep instructions to initialize a new system, or to add a re
ceiver to an existing system
1.2 Group Scan
Receiver automatically scans for the best available group, if applic
able.
Note: Some bands consist of only a single group. RF performance is the same in
single-group bands as in bands that support multiple groups.
1.3 Channel Scan
Receiver automatically scans for available channels within the se
lected group
1.4 Manual Fre-
quency Setup
Manually tune the receiver to a desired frequency
2. Channel Name Customize the channel name
3. Gain Monitor audio levels and adjust the receiver gain
4. Mic/Line Level Switch between output levels
5. Advanced Settings
5.1 Device Lock
Unlock: Receiver is unlocked
Lock Menu: Receiver settings are locked
Lock Menu & Power: Receiver settings and power button are
locked
5.2 Network Con-
figuration
Switch between automatic and manual IP addressing
5.3 Controller Ac-
cess
Block or allow third-party control access
5.4 Transmitter
Preset
Apply and sync transmitter presets
5.5 Device Preset Save current receiver settings or restore last saved settings
To Next Page
Loading...
