Shure SLX-D - SLXD5 Menu Structure and Configuration

Shure Incorporated
14/56
5.6 Factory Reset Restores all settings to factory defaults following a system reboot
5.7 Transmitter
Firmware
Update transmitter firmware using IR sync
5.8 About Displays firmware version and serial number
6. Help Provides a link to additional materials (http://help.shure.com/slxd4)
SLXD5 Menus and Configuration
From the home screen, press Enter to see your menu options. Use the arrow keys to cycle through options, push Enter to con
firm your selection, or press Exit to return to the previous screen.
Frequency
Channel Scan
Arrow keys change the selected group as needed, Enter automatically scans for avail
able channels within the selected group
Group Scan
Receiver automatically scans for the group with the most available channels, if applica
ble. Arrow keys change the group as needed, Enter accepts the selected group.
Note: Some bands consist of only a single group. RF performance is the same in single-group bands as in bands
that support multiple groups.
Manual Setup
Manually tune the receiver to a desired frequency
Audio Out
Audio Out
Select Balanced (Mono) for XLR devices, or Dual Mono for 3.5mm devices, and adjust
gain
Headphone
Adjust headphone gain
Mic/Line
Switch between output levels
Channel Name Customize the channel name