Need help?Do you have a question about the Shure SLXD4 and is the answer not in the manual?
General| Impedance | 50 Ω |
|---|---|
| Antenna type | Removable |
| Display type | OLED |
| Ethernet LAN | Yes |
| Mounting type | - |
| Product color | Black |
| Housing material | Metal |
| Antennas quantity | 2 |
| Channels quantity | 32 channels |
| Switching bandwidth | 44 MHz |
| Antenna connector type | BNC |
| Operating frequency type | Ultra High Frequency (UHF) |
| Radio Frequency (RF) range | 562 - 606 MHz |
| Operating temperature (T-T) | -18 - 50 °C |
| Microphone frequency response | 20 - 20000 Hz |
| Total Harmonic Distortion (THD) | 0.02 % |
| XLR out | 1 |
| Input voltage | 15 V |
| Power supply type | AC |
| Current consumption | 600 mA |
Weight and Dimensions| Depth | 152 mm |
|---|---|
| Width | 197 mm |
| Height | 42 mm |
| Weight | 816 g |
Details the front and back panel layout and controls of the SLX-D receiver.
Instructions for installing AA or Shure SB903 rechargeable batteries in bodypack and handheld transmitters.
Explains how wireless audio channels are formed and the methods for tuning receivers and transmitters.
Procedure for updating transmitter firmware using the receiver's IR sync function.
Details RF performance characteristics including frequency range, sensitivity, and rejection.
Details audio performance characteristics like latency, frequency response, and dynamic range.
To Next Page