Need help?Do you have a question about the Shure SLX D Series and is the answer not in the manual?
General| Encryption | 256-bit AES |
|---|---|
| Latency | 3.2 ms |
| RF Sensitivity | -97 dBm at 10-5 BER |
| System Type | Digital Wireless |
| Operating Range | Up to 100 m (300 ft) line of sight |
| Audio Frequency Response | 20 Hz – 20 kHz |
| Number of Channels | Up to 32 per band |
| Audio Output Connectors | XLR, 1/4" |
| Networking | Ethernet |
| RF Output Power | 10 mW (region dependent) |
| Power Requirements | 2 AA batteries or SB903 rechargeable battery |
| Battery Life | Up to 10 hours (with standard AA batteries) |
| Dimensions | Varies by model |
| Weight | Varies by model |
| Frequency Range | 470-952 MHz (region dependent) |
| Dynamic Range | 120 dB, A-weighted |
| Signal-to-Noise Ratio | 120 dB, A-weighted |
Options for setting up system frequencies and channels.
Access to advanced features like device lock, network config, and presets.
Covers menu screens, navigation, and settings like Mic Offset and RF Power.
Step-by-step guide for installing AA or rechargeable batteries.
Explains how wireless audio channels are formed.
How to link transmitters to the receiver and match audio levels.
Options for setting transmitter RF power to determine the transmission range.
Detailed RF and audio performance metrics including range, latency, and frequency response.
Physical characteristics and power requirements for SLXD4/SLXD4D receivers.
Table detailing frequency ranges for different bands and their output power.
To Next Page
