EasyManuals Logo

Shure SLX D Series User Manual

Shure SLX D Series
43 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #17 background imageLoading...
Page #17 background image
Shure Incorporated
17/43
1.
2.
3.
1.
2.
3.
Setting the AA Battery Type
To ensure accurate display of transmitter runtime, set the battery type in the transmitter menu to match the installed AA battery
type (the default setting is Alkaline). If a Shure rechargeable battery is installed, selecting a battery type is not necessary and
the battery type menu will not be displayed.
Press the menu button to navigate to the Battery screen.
Press enter, then use the menu button to select the installed battery type:
Alkaline = Alkaline
NiMH (nickel metal hydride)
Lithium (non-rechargeable, 1.5V max)
Press enter to save.
Shure SB903 Rechargeable Battery
The SB903 lithium-ion rechargeable battery powers the SLX-D transmitters. Use the SBC10-903 single bay or SBC203 dual
bay chargers to recharge SB903 batteries.
Important: Always fully charge a new battery before first use.
To fully charge a new SB903 battery, it must be placed directly in the charger. After the first charge, the battery can be charged
by docking the transmitter in the SBC203 dual-bay charging station.
Single Bay Charger
The SBC10-903 single bay charger offers a compact charging solution.
Plug the charger into an AC power source or USB port.
Insert a battery into the charging bay.
Monitor the charging status LEDs until charging is complete.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Shure SLX D Series and is the answer not in the manual?

Shure SLX D Series Specifications

General IconGeneral
Encryption256-bit AES
Latency3.2 ms
RF Sensitivity-97 dBm at 10-5 BER
System TypeDigital Wireless
Operating RangeUp to 100 m (300 ft) line of sight
Audio Frequency Response20 Hz – 20 kHz
Number of ChannelsUp to 32 per band
Audio Output ConnectorsXLR, 1/4"
NetworkingEthernet
RF Output Power10 mW (region dependent)
Power Requirements2 AA batteries or SB903 rechargeable battery
Battery LifeUp to 10 hours (with standard AA batteries)
DimensionsVaries by model
WeightVaries by model
Frequency Range470-952 MHz (region dependent)
Dynamic Range120 dB, A-weighted
Signal-to-Noise Ratio120 dB, A-weighted

Related product manuals