EasyManuals Logo

Shure SLX D Series User Manual

Shure SLX D Series
43 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #2 background imageLoading...
Page #2 background image
Shure Incorporated
2/43
Table of Contents
SLX-D Wireless System 3
IMPORTANT SAFETY INSTRUCTIONS 3
WARNING 4
Important Product Information 4
LICENSING INFORMATION 4
Australia Warning for Wireless 4
Overview 5
Features 5
System Components 6
Set Up the Receiver 8
Wearing the Bodypack Transmitter 9
Hardware Interface 10
Receiver Front and Back Panels 10
Navigating the Receiver Menus 11
Transmitters 13
Transmitter Menu Options and Navigation 15
Locking and Unlocking the Receiver Controls 15
Batteries and Chargers 16
Install Transmitter Batteries 16
Setting the AA Battery Type 17
Shure SB903 Rechargeable Battery 17
Average Charging Times 19
Sound Check and Gain Adjustment 19
System Set Up 20
Creating Audio Channels 20
What are Groups and Channels? 20
Using the Guided Frequency Setup 21
Manual Frequency Selection 22
Linking Two Transmitters to a Receiver 23
Adding SLX-D to Other Shure Wireless Systems 23
Radio Frequency (RF) Settings 23
Setting the Transmitter RF Power 23
Networking 24
Connecting to a Network 24
Automatic IP Addressing 24
Configuration Tips 24
Network Troubleshooting 24
Connecting to an External Control System 24
Firmware Updates 24
Firmware Release Requirements 25
Mount the SLX-D Receiver in a Rack 25
Installing Footpads 26
Accessories 27
Optional Accessories 27
Specifications 31
Receiver Output Connectors 38
Transmitter Input 38
Frequency Range and Transmitter Output Power 38
Frequencies for European Countries 39
Certifications 41
Information to the user 41

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Shure SLX D Series and is the answer not in the manual?

Shure SLX D Series Specifications

General IconGeneral
Encryption256-bit AES
Latency3.2 ms
RF Sensitivity-97 dBm at 10-5 BER
System TypeDigital Wireless
Operating RangeUp to 100 m (300 ft) line of sight
Audio Frequency Response20 Hz – 20 kHz
Number of ChannelsUp to 32 per band
Audio Output ConnectorsXLR, 1/4"
NetworkingEthernet
RF Output Power10 mW (region dependent)
Power Requirements2 AA batteries or SB903 rechargeable battery
Battery LifeUp to 10 hours (with standard AA batteries)
DimensionsVaries by model
WeightVaries by model
Frequency Range470-952 MHz (region dependent)
Dynamic Range120 dB, A-weighted
Signal-to-Noise Ratio120 dB, A-weighted

Related product manuals