Shure SLX D Series User Manual

Shure Incorporated
25/43
1.
2.
3.
4.
5.
6.
•
•
Firmware Updates
Firmwareisembeddedsoftwareineachcomponentthatcontrolsfunctionality.Periodically,newversionsoffirmwarearedevel
oped to incorporate additional features and enhancements. To take advantage of design improvements, new versions of the
firmware can be uploaded and installed using the Shure Update Utility (SUU). Download the SUU from https://www.shure.com/
en-US/products/software/shure_update_utility.
Perform the following steps to update the firmware:
CAUTION! Ensure the device has a stable network connection during the update. Do not turn off the device until the update is complete.
Connect the device and computer to the same network (set to the same subnet).
Open the SUU application.
Click the Updates button at the top of the window to open the Download Manager.
Note: This button will be labeled either "Check for updates..." or "[#] updates available"
From the Download Manager, select the desired firmware versions.
Tip: The dropdown in the upper right allows you to quickly Select: All or Select: None.
Note: After updating, you may need to clear your browser's cache to display updates to the device's web application.
Click Download, and then Close the Download Manager.Downloadedfirmwareislistedandcanbeviewedandman
aged in the Firmware tab.
From the Update Devices tab, select the new firmware and press Send Updates to begin the firmware update, which
overwrites the existing firmware on the device.
Firmware Release Requirements
All devices are part of a network with multiple communications protocols that work together to ensure proper operation. The
recommended best practice is that all devices are on an identical release. To view the firmware version of each device on the
network, navigate to device configuration and look under (Settings) > Firmware.
TheformatforShuredevice’sfirmwareisMAJOR.MINOR.PATCH.(Ex.1.6.2where1istheMajorfirmwarelevel,6istheMi
nor firmware level, and 2 is the Patch firmware level.) At a minimum, devices that operate on the same subnet should have
identical MAJOR and MINOR release numbers.
Devices of different MAJOR releases are not compatible.
Differences in the PATCH firmware release level may introduce undesired inconsistencies.
Mount the SLX-D Receiver in a Rack
All accessories are supplied:

Shure SLX D Series Specifications

General

Encryption	256-bit AES
Latency	3.2 ms
RF Sensitivity	-97 dBm at 10-5 BER
System Type	Digital Wireless
Operating Range	Up to 100 m (300 ft) line of sight
Audio Frequency Response	20 Hz – 20 kHz
Number of Channels	Up to 32 per band
Audio Output Connectors	XLR, 1/4"
Networking	Ethernet
RF Output Power	10 mW (region dependent)
Power Requirements	2 AA batteries or SB903 rechargeable battery
Battery Life	Up to 10 hours (with standard AA batteries)
Dimensions	Varies by model
Weight	Varies by model
Frequency Range	470-952 MHz (region dependent)
Dynamic Range	120 dB, A-weighted
Signal-to-Noise Ratio	120 dB, A-weighted