Shure SLX D Series - SLXD1 Transmitter Specifications

Shure Incorporated
33/43
Configuration
1/4" (6.35 mm) Balanced (Tip = audio +, Ring = audio -, Sleeve = ground)
XLR Balanced (1=ground,2=audio+,3=audio−)
Impedance
1/4" (6.35 mm) 1.3kΩ (670Ω Unbalanced)
XLR (line) 400Ω (200Ω Unbalanced)
XLR (mic) 150Ω
Full Scale Output
1/4" (6.35 mm) +15dBV differentially (+9dBV single)
XLR LINE setting= +15 dBV, MIC setting= -15 dBV
Mic/Line Switch
30 dB pad
Networking
Network Interface
Single Port Ethernet 10/100 Mbps
Network Addressing Capability
DHCP or Manual IP address
Maximum Cable Length
100m (328ft)
SLXD1
Battery Type
Rechargeable Li-Ion or 1.5V AA batteries
Dimensions
98 x 68 x 25.5mm (3.86 x 2.68 x 1 in.), H x W x D
Weight
89g
Housing
PC/ABS
Audio Input
Connector
4-Pin male mini connector (TA4M)