Shure SLXD4 - Transmitters

Shure Incorporated
12/43
•
•
•
◦
◦
1.4 Manual Fre-
quency Setup
Manually tune the receiver to a desired frequency
2. Channel Name Customize the channel name
3. Gain Monitor audio levels and adjust the receiver gain
4. Mic/Line Level Switch between output levels
5. Advanced Settings
5.1 Device Lock
Unlock: Receiver is unlocked
Lock Menu: Receiver settings are locked
Lock Menu & Power: Receiver settings and power button are
locked
5.2 Network Con-
figuration
Switch between automatic and manual IP addressing
5.3 Controller Ac-
cess
Block or allow third-party control access
5.4 Transmitter
Preset
Apply and sync transmitter presets
5.5 Device Preset Save current receiver settings or restore last saved settings
5.6 Factory Reset Restores all settings to factory defaults following a system reboot
5.7 Transmitter
Firmware
Update transmitter firmware using IR sync
5.8 About Displays firmware version and serial number
6. Help Provides a link to additional materials (http://help.shure.com/slxd4)
Transmitters
① Power LED
Green = unit is powered on
Red = low battery
② On/Off Switch
Powers the transmitter on or off.