Shure SLX-D - Page 15

Shure Incorporated
15/56
◦
◦
◦
◦
◦
◦
◦
Device
Device Lock
Unlock: Receiver is unlocked
Menu Only: Receiver settings are locked
Menu & Power: Receiver settings and power button are locked
Device Preset
Save current receiver settings or restore last saved settings
Battery
To ensure accurate battery metering, set the battery type to match the installed AA bat
tery type.
Note: Menu is not selectable when Shure rechargeable batteries are installed.
Buttons Control
Determine the function of the up/down buttons from the home screen:
Audio Out: Change audio output gain
Headphone: Change headphone volume
Display
Set the OLED display timeout
Tone Generator
Turn the continuous test tone on or off, and set volume in dB
Factory Reset
Restores all settings to factory defaults following a system reboot
About
Displays firmware version and serial number
TX (Transmitter Settings)
Tx Presets
Apply and sync transmitter presets:
Mic Offsets: Match audio levels between transmitters used in a combo system. Range is
0 to 21 dB (3 dB increments).
SLXD3 Pad/Boost: Adjust the pad to avoid overloading the audio input or add a boost to
low-output sources:
12 dB: Use with high output sources, such as line levels and pointtopoint applications.
Off (default): Use with typical microphones.
+12 dB: Use with low output sources.