Shure SVX - Optional Accessories; Replacement Parts; Frequency Range

Shure Incorporated
10/14
Whenusingtwoormoresystemssimultaneously,chosedifferentchannelswithinthesamegroup(chan
nels 1-4 or channels A-D). For the JB1 band, there are three groups: channels 1-3, 4-6, and 7-8.
Turnofforrelocatepossiblesourcesofinterferencesuchascellphones,radios,orotherelectronicde
vices.
Increase squelch (clockwise) to restrict the receiver from picking up ambient noise.
Unplug any unused receivers
Audio distor
tion
Adjust levels on the mixer board or sound system.
Make sure all cables are securely connected from the receiver to the sound system.
If using a bodypack transmitter, lower the gain settings.
Optional Accessories
Color Rings (6) WACR
Single Channel Rack Mount Kit WASRM
Dual Channel Rack Mount Kit WADRM
Replacement Parts
Channel Key 53A14226
Microphone Stand Adapter 95A14227
Power Supply PS24
See your local Shure distributor for assistance
Frequency Range
Band Frequency Range ( MHz )
P12 698 to 710
P14 710 to 726
P16 726 to 742
Q16 742 to 758
Q18 758 to 774
R23 774 to 787