Need help?Do you have a question about the Shure P3RA and is the answer not in the manual?
General| Display | LCD |
|---|---|
| Housing | Metal |
| Image Rejection | > 90 dB |
| Adjacent Channel Selectivity | >70 dB |
| Intermodulation Attenuation | >70 dB |
| Blocking | > 80 dB |
| Tuning Steps | 25 kHz |
| Type | Bodypack |
| Frequency Range | 470 - 952 MHz |
| Audio Output Power | 100 mW (at 1 kHz, <1% distortion, typical) |
| Dimensions | 99 mm x 66 mm x 23 mm |
| RF Frequency Range | 470 - 952 MHz |
| RF Sensitivity | 2.2 μV at 20 dB SINAD |
| Minimum Load Impedance | 16 Ω |
| Headphone Connector | 3.5 mm |
| Battery Type | SB900A |
| Audio THD | < 0.5% |
| Power Requirements | 2 AA batteries or Shure SB900A rechargeable battery |
| Dimensions (inches) | 3.9 x 2.6 x 0.9 |
| Net Weight | 196 g (with batteries) |
Highlights potential dangers like battery explosion, fire, and electric shock risks.
Advises on handling precautions to prevent moderate injury or property damage.
Configures stereo or MixMode listening. Blend between mixes is adjustable.
Adjusts bass or treble frequencies with a two-band shelving equalizer.
Sets the maximum volume level to attenuate the highest possible volume.
Adjusts left/right balance in Stereo or blend between channels in MixMode.
Customizes display screen contrast by selecting a setting between low and high.
Locks all controls except volume knob to prevent accidental changes.
Displays remaining battery runtime, temperature, status, cycle count, health, voltage.
Restores bodypack to factory default settings.
Automatically turns off the bodypack after a selectable time.
Audio from channel 1 on left, channel 2 on right. Enhances clarity and separation.
Blend between two monitoring mixes is adjustable. Signal is mono, heard on both earphones.
Details the LED indicators (Red, Green, Amber, Off) for charging status.
To Next Page
