Shure GLXD4R+ User Manual

Shure Incorporated
3/11
1.
2.
3.
1.
2.
3.
1.
2.
3.
GLXD4R+
Set Up the Receiver
Attach the included antennas to the back of the receiver.
Connect the power supply to the receiver and plug the cord into an AC power source.
Connect the audio output to an amplifier or mixer.
Install Transmitter Batteries
Bodypack:
Move the locking lever to the open position and slide the battery door open.
Place the battery into the transmitter.
Close the battery door.
Handheld:
Unscrew and remove the battery cover.
Place the battery into the transmitter.
Replace and tighten the battery cover.

Shure GLXD4R+ Specifications

General

Receiver Type	Digital
Form Factor	Rackmount
RF Output Power	10 mW
Tuning Steps	25 kHz
Audio Frequency Response	20 Hz–20 kHz
Dynamic Range	120 dB
Weight	0.9 lb (0.4 kg)
Operating Range	Up to 100 meters
Audio Output	XLR and 1/4" outputs
Network Interface	Ethernet
Display	LCD
Encryption	AES 256-bit
Operating Temperature Range	-18°C to 57°C (0°F to 135°F)
Number of Channels	Single Channel

Summary

Set Up the Receiver

Install Transmitter Batteries

Bodypack Transmitter Battery Installation

Steps for installing batteries in a bodypack transmitter.

Handheld Transmitter Battery Installation

Steps for installing batteries in a handheld transmitter.

System Set Up

Linking Receiver and Transmitter

Steps to turn on, select group/channel, and link receiver and transmitter for operation.

Linking Two Transmitters to a Receiver

Identifying Linked Transmitters and Receivers with Remote ID

Activating Remote ID

Instructions to activate and use the remote ID feature to identify linked devices.

Gain Adjustment

Adjusting Transmitter Gain

How to increase or decrease the gain of a linked transmitter using receiver buttons.

Locking and Unlocking the Controls

Locking Receiver Controls

Steps to lock and unlock the receiver controls using button combinations.

Locking Transmitter Power Switch

Procedures to lock and unlock the transmitter power switch.

Firmware

IMPORTANT SAFETY INSTRUCTIONS

General Safety Precautions

Instructions for safe operation, cleaning, installation, and handling of the apparatus.

Electrical Safety Warnings

Warnings related to power cords, grounding, water exposure, and avoiding electric shock.

Information to the user

FCC Compliance and Operation

Details on FCC rules, interference, and user guidance for compliance.

Certifications

FCC and IC Certifications

Identifies FCC ID, IC, and compliance with radiation exposure limits.

Waste Electrical and Electronic Equipment (WEEE) Directive

REACH Compliance

CE and UKCA Notices

CE Declaration of Conformity

Statement of compliance with European Union requirements for CE Marking.

UKCA Declaration of Conformity

Statement of compliance with UKCA Marking requirements.