EasyManua.ls Logo

Shure T4A - Transmitter Specifications

Shure T4A
28 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
22
English
23
English
Transmitter Specifications
T2, UT2 Hand-Held Transmitter
RF Output UT2 15 mW Typical
T2 50 mW Typical (FCC); 20 mW Typical (ETSI)
Dimensions UT2/58 (SM58) 241 mm H x 51 mm D (9.49” H x 2.01” D)
UT2/BETA58 241.3 mm H x 36.83 mm D (9.5” H x 1.45” D)
UT2/PG58 227 mm H x 51 mm D (8.94” H x 2.01” D)
T2/58 (SM58) 236 mm H x 51 mm D (9.29” H x 2.01” D)
T2/PG58 222 mm H x 51 mm D (8.74” H x 2.01” D)
Net Weight UT2/58 (SM58) 296g (10.4 oz.)
UT2/BETA58 296g (10.4 oz.)
UT2/PG58 267 g (9.4 oz.)
T2/58 (SM58) 295 g (10.4 oz.)
T2/PG58 266 g (9.4 oz.)
Power Requirements 9 V alkaline battery (Duracell MN1604 recommended); 9 V lithium ULTRALIFE
battery optional.
Nominal Current Drain UT2 40 mA
T2 30 mA
Shure Model T2 and UT2 Transmitters meet the essential requirements of the European R&TTE Directive 99/5/EC and are eligible to carry the CE
marking.
T2/58: Type accepted under FCC Parts 74 and 90. Certified by IC in Canada under TRC-78.
UT2/58, UT2/BETA58: Type accepted under FCC Part 74. Certified by IC in Canada under RSS-123.
T1, T1G, T11, UT1 Body-Pack Transmitter
RF Output T1, T1G 50 mW typical
T11 20 mW typical
UT1 15 mW Typical
Input Configuration Unbalanced
Connector Type T1, T11, UT1 4–pin Miniature connector (male)
T1G 1/4”
Actual Impedance 1 MΩ
Connector Pin Assignments T1, T11, UT1 Pin 1: ground • Pin 2: +5 V bias • Pin 3: audio • Pin 4: 20kΩ resistor to audio ground
T1G Tip: audio • Sleeve: ground
Dimensions T1, T1G 64 mm H x 106 mm W x 24 mm D (2.52” H x 4.17” W x 0.95” D)
T11, UT1 83 mm H x 64 mm W x 26 mm D (3.27” H x 2.50” W x 1.03” D)
Net Weight T1, T1G 96.4 g (3.4 oz.)
T11, UT1 79.4g (2.8 oz.)
Power Requirements 9 V alkaline battery (Duracell MN1604 recommended); 9 V lithium ULTRALIFE
battery optional.
Nominal Current Drain T1, T1G, T11 30 mA
UT1 40 mA
Shure Model T11 and UT1 Transmitters meet the essential requirements of the European R&TTE Directive 99/5/EC and are eligible to carry the CE
marking.
T1, T1G: Type accepted under FCC Parts 74 and 90. Certified by IC in Canada under TRC-78.
UT1: Type accepted under FCC Part 74. Certified by IC in Canada under RSS-123.

Related product manuals