Shure ULX User Manual (English)

Other manuals for Shure ULX

Manual31 pages

User Guide Supplement20 pages

Questions and Answers:

D
Duane SmithJul 28, 2025
How to fix a Shure Microphone system with no sound?
- K
  Kristin JacobsJul 29, 2025
  If there's no sound from your Shure Microphone system, try these steps: * Ensure the transmitter POWER switch is ON. * Verify the battery is correctly inserted (+/– terminals aligned). * Try a fresh battery. * Confirm the receiver's AC adapter is securely plugged into both the outlet and the receiver. * Check the AC outlet for proper voltage. * Ensure the receiver is plugged in and powered ON. * Match the transmitter and receiver frequencies. * Extend the receiver antennas at a 45° angle from vertical. * Move the receiver away from metal objects. * Remove obstructions between the transmitter and receiver. * Move the transmitter closer to the receiver.
G
George OlsonAug 1, 2025
What to do if my Shure ULX Microphone system has no sound or the sound is faint?
- L
  lwilliamsAug 2, 2025
  If you're experiencing no sound or faint sound with your Shure Microphone system: * Increase the transmitter gain until the Audio Peak icon flashes during loud sounds. * Turn up the receiver volume control. * Check the cable connection between the receiver and your amplifier or mixer.
D
Dr. Nicholas RandallAug 6, 2025
Why does my Shure ULX have bursts of noise or distortion?
- M
  Megan HaynesAug 6, 2025
  If you are experiencing bursts of noise, distortion, or other radio performance issues with your Shure Microphone system: * If the noise occurs when the transmitter is off, identify and eliminate nearby RF sources like other wireless systems or CB radios. * Try changing the wireless system's operating frequency.
R
Ronnie DavisAug 11, 2025
How to adjust the sound level on my Shure Microphone system to match a cabled guitar or microphone?
- S
  Susan WelchAug 11, 2025
  If the sound level from your Shure Microphone system's receiver differs from a cabled guitar or microphone, adjust the transmitter gain and receiver volume as needed to achieve the desired level.
J
Jacob LoganAug 15, 2025
Why does the sound level change when I switch guitars on my Shure Microphone system?
- J
  Jonathan DanielsAug 15, 2025
  If the sound level changes when you switch guitars using your Shure Microphone system, adjust the transmitter gain to compensate for the differences in guitar output levels.
S
Shawn WilsonAug 19, 2025
What causes gradually increasing distortion in my Shure Microphone system?
- A
  Amanda ElliottAug 19, 2025
  If the distortion gradually increases in your Shure Microphone system, try replacing the transmitter battery.
B
Benjamin PopeAug 23, 2025
What does it mean when my Shure ULX displays E000 or F000?
- D
  donald26Aug 23, 2025
  If your Shure Microphone system's receiver or transmitter LCD displays E000, F000, or a similar code instead of the group and channel, it means the device is in Master List mode. To exit, press and hold the SET button for about 10 seconds until the display changes.