EasyManua.ls Logo

Shuttle HOT-603 - PCI Configuration Setup

Shuttle HOT-603
37 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
30
PCI Configuration Setup
PNP OS Installed
When this item is set to Yes, it will allow the PnP OS(Windows 95) control the
system resources except PCI devices and PnP boot devices.
Default setting is No.
Resources Controlled By
The Award Plug and Play BIOS has the capability to automatically configure all of the
boot and Plug and Play compatible devices. However, this capability means abso-
lutely nothing unless you are using a Plug and Play operating system as Windows 95.
Reset Configuration Data
This item allows you to determine whether to reset the configuration data or not.
IRQ 3/4/5/7/9/10/11/12/14/15, assigned to
These items allow you to determine the IRQ assigned to the ISA bus and is not
available for PCI slot.
Choices are Legacy ISA and PCI/ISA PnP.
DMA 0/1/3/5/6/7 assigned to
These items allow you to determine the DMA assigned to the ISA bus and is not
available for PCI slot.
Choices are Legacy ISA and PCI/ISA PnP.

Related product manuals