SiAECOSYS V2
1. Software installation (only support win 7/10)
1.1 USB Driver Installation
(1) Download the “USB-to-serial-win 10-20150814” file, decompressing file.
(2) choose the suitable driver with your computer for installation.
win7,win8, win 10 are available.
1.11. Decompress the operation first
2. Unzip the YH-340 USB package and select CH341SER.EXE to install it.
Follow the steps above to install
(3) After installation, please connect the USB cable with controller and computer.
If it’s unable to connect, pls Check below steps
Right click“my computer” in the desktop
To Next Page
Loading...