SiAECOSYS VOTOL EM Series - Select USB Debug Line and Host Software

SiAECOSYS V2
8
2.1.1 According to the controller with CAN or without CAN to select the appropriate USB debug line; with CAN controller
need to check the CAN enable, without CAN does not need to check; EM200 controller needs to exchange the debug line
CAN-H and CAN- L , otherwise can’t connect the controller;
2.1.2 Host computer selection
EM50 EM100 EM150 without CAN choose
EM50 EM100 EM150 with CAN choose
EM200 choose
EM50 EM100 EM150 EM200 model XY-03-P with CAN and without CAN can share a host computer
Specific host model needs to inquire the related sales;