Siargo FS8000 - Product Performance; Technical Specifications

14
www.Siargo.com FS800o User Manual
7. Product performance
7.1 Technical specifications
All specifications listed in the following table, unless otherwise noted, apply for standard conditions
at 20°C and 101.325 kPa absolute pressure with air.
Value
Unit
Flow range (FS8001)
0 … 30, 100, 200, 500
sccm
(FS8001N)
0 … 500
sccm
(FS8003P)
0 … 4, 5, 6
SLPM
Accuracy (total error band)
±(2.5+0.5FS)
%
Repeatability
0.1
%FS
Response time (FS8001 / FS8003P)
5.0
msec
(FS8001N)
1.0
msec
Working temperature
0~ 55
°C
Temperature coefficient
<±0.12
%/°C
Working pressure
0.5
MPa
Humidity
<95 (no condensation)
%RH
Power supply
8~24
Vdc
Working current
<20
mA
Output (FS8001 / FS8003P)
Linear, I
2
C; Analog: 0.5~4.5Vdc
(FS8001N)
Nonlinear, Analog: 1.0(±0.025)~5.0(±0.1)Vdc
Mechanical connection (FS8001 / FS8001N)
M5
(FS8003P)
BSPT 1/8” (inlet); M5 (outlet)
Maximum overflow
10x of the full scale
Maximum flow change per second
2.5x of the full scale
Storage temperature
-20~70
°C
Calibration
Air @ 20°C, 101.325kPa
Compliance
RoHS
CE
IEC 61000-2;-4
Note: 1. Calibration with real gas is optional. Please contact the manufacturer for further information.