3.2 Power and data pinout description
FS8001 has two models: linearized and non-linear output. The non-linear output models only
offer analog output with a response time of 1.o msec for fast automation such as die-attachment
equipment. FS8003 only offers linearized models.
Table 3.1: FS8001 linearized model pin assignment.
Table 3.2: FS8001 non-linear model (FS8001N) pin assignment.
Table 3.3: FS8003P pin assignment.
Note: The connector on the sensor is an SM05B-SRSS-TB manufactured by JST; the cable match is SHR-
05V-S (no protrusions), also made by JST. The contact is either SH-003GA-P0.2 or SSH-003-P0.2H.
To Next Page
Loading...