NOTI124SUS-R01.docx Translation of the original instructions 8/19
V - MAINTENANCE
The marking machine is a scratching marking system. It was developed and manufactured
especially to meet the needs of our clients who want a machine which is:
Sturdy and robust,
Reliable,
Ergonomic.
It needs very little maintenance and if you observe the preventive maintenance
recommendations, you will increase the life-expectancy of your machine.
However, if a problem occurs, please refer to this manual, which will help you solve the
problem.
VI – AFTER SALES SERVICE
Please call first your local distributor.
If you can not reach your distributor, please contact SIC at:
Telephone: (33) 4 72 54 80 00
Fax : (33) 4 78 47 39 40
Internet: http://www.sic-marking.com
E-mail: info@sic-marking.com
VII – PREVENTIVE MAINTENANCE
If you want to keep your machine in good working conditions, it is necessary to do the
following actions :
- CLEAN the pin guide/ stylus
- AVOID dust on the guiding rails and the lead screws
- DISASSEMBLY / LUBRICATION
To Next Page
Loading...