In addition to the configuration via slot module, the port configuration can still be
changed via configuration object 0x2000 additional start-up parameters, see REF.
8.1.1.2.2 Digital input (pin 4)
Follows the selection of the configuration of pin 4 as digital input via the corresponding
slot module:
8.1.1.2.3 Digital output (pin 4)
Follows the selection of the configuration of pin 4 as digital output via the correspond‐
ing slot module:
8 OPERATION
28
O P E R A T I N G I N S T R U C T I O N S | Sensor Integration Gateway - SIG350 8027836./2022-06-10 | SICK
Subject to change without notice
To Next Page
Loading...
