8.1.1.2.4 Start-up parameters
You can preconfigure the IO-Link ports and the outputs in the “Startup” tab. You can
edit the entry by selecting it and then calling up the context menu. The entries are
transferred when the configuration is overwritten. You also have the option of activating
the validation for an IO-Link port. This allows you to check whether a particular device is
connected.
OPERATION 8
8027836./2022-06-10 | SICK O P E R A T I N G I N S T R U C T I O N S | Sensor Integration Gateway - SIG350
29
Subject to change without notice
To Next Page
Loading...
