In the SIG350, IP addressing is preconfigured to BootP in the delivery state.
After assigning the IP address, enter http:// followed by the IP address, e.g. http://
192.168.0.1, in the address bar of your web browser to access the web interface. If the
device status page is not displayed, check your browser and firewall settings.
3.2 Operating elements and status indicators
3.2.1 Model structure
SIG350
S4 S8
0 01 1
S3 S7
0 01 1
S2 S6
0 01 1
S1 S5
0 01 1
BF SF LNK1 ST LNK2 UA US
ACT1 ACT2 POWER
PWR1 PWR2
x100 x10 x1
P1 P2
1
2
3
4
5
6
7
8
9
Figure 1: Model structure
1
Sensor/Actuator connection (8x): IO-Link port S1 – S8
2
LED status indicators for bus and device status
3
Voltage supply (2x): Voltage input (PWR1) and output (PWR2)
4
Rotary switch
5
Ethernet connection (2x): Ethernet Port P1 – P2
6
Mounting opening
7
LED display for IO-Link port S1 – S8 (2x per port)
8
Marking labels (removable)
9
Connection for functional earth
3.2.2 Status indicators
PRODUCT DESCRIPTION 3
8027834./2022-06-10 | SICK O P E R A T I N G I N S T R U C T I O N S | Sensor Integration Gateway - SIG350
11
Subject to change without notice
To Next Page
Loading...
