SICK EtherNet/IP SIG350

Bit Description
Bit 0 Reserved always “0”
Output assembly
Table 18: Output assembly
Byte Designa‐
tion
Data
length
Data
type
Description
0 DO Status 1 byte USINT -
1 Reserved 7 byte ARRAY -
2… 3 DO Status 2bytes USINT See
4 S1 port Output Enable 1 byte USINT Activation of process data
5 Reserved 1 byte USINT -
6 ... 37 IOL data 32byte ARRAY Process data of the device
38 S2 port Output Enable 1 byte USINT Activation of the digital output
39 Reserved 1 byte USINT -
40 ... 71 IOL data 32byte ARRAY Process data of the device
72 S3 port Output Enable 1 byte USINT Activation of the digital output
73 Reserved 1 byte USINT -
74 ... 105 IOL data 32byte ARRAY Process data of the device
106 S4 port Output Enable 1 byte USINT Activation of the digital output
107 Reserved 1 byte USINT -
108 ...
139
IOL data 32byte ARRAY Process data of the device
140 S5 port Output Enable 1 byte USINT Activation of the digital output
141 Reserved 1 byte USINT -
142 ...
173
IOL data 32byte ARRAY Process data of the device
174 S6 port Output Enable 1 byte USINT Activation of the digital output
175 Reserved 1 byte USINT -
176 ...
207
IOL data 32byte ARRAY Process data of the device
208 S7 port Output Enable 1 byte USINT Activation of the digital output
209 Reserved 1 byte USINT -
210 ...
241
IOL data 32byte ARRAY Process data of the device
242 S8 port Output Enable 1 byte USINT Activation of the digital output
243 Reserved 1 byte USINT -
244 ...
275
IOL data 32byte ARRAY Process data of the device
NOTE
To set the digital output, the corresponding output enable bit of the port must be set.
8.1.1.5 CIP objects
The SIG350 supports the following object classes:
OPERATION 8
8027834./2022-06-10 | SICK O P E R A T I N G I N S T R U C T I O N S | Sensor Integration Gateway - SIG350
39
Subject to change without notice