5. In the Module Definition area, the appropriate connection must still be selected.
The following options are available:
- Exclusive Owner - 32 bytes per IO-Link Port
- Exclusive Owner - 32 bytes per IO-Link Port without Config
- Listen only - 32 bytes per IO-Link Port
- Input Only - 32 bytes per IO-Link Port
- Exclusive Owner - 16 bytes per IO-Link Port
- Exclusive Owner - 16 bytes per IO-Link Port without Config
- Listen only - 16 bytes per IO-Link Port
- Input Only - 16 bytes per IO-Link Port
- Exclusive Owner - 4 bytes per IO-Link Port
- Exclusive Owner - 4 bytes per IO-Link Port without Config
- Listen only - 4 bytes per IO-Link Port
- Input Only - 4 bytes per IO-Link Port
6. The cycle time can be configured via the Connection, Requested Packet Interval
(RPI) tab.
OPERATION
8
8027834./2022-06-10 | SICK O P E R A T I N G I N S T R U C T I O N S | Sensor Integration Gateway - SIG350
33
Subject to change without notice
To Next Page
Loading...
